The NC-MG1000-X belongs to the NICEUC Communications Integrated Access Device series and features a dual X86 architecture, dual main control and dual power supply. An X86 computing platform is built into the chassis and can host business software, so no separate server is required. A single device supports up to 4 E1/T1, 48 GSM/CDMA/WCDMA/4G, 96 FXO/FXS, 24 PTT, 48 magneto, 48 E&M and 24 audio interfaces, with 6 service board slots.
On the protocol side it covers SS7 (No.7), PRI, No.1 R2, CAS, Q.SIG, V5.2 and DPNSS signaling, SIP/IMS access, G.711, G.729 and G.726 codecs, and T30 / T38 / pass-through fax. It is mainly applied in specific industries such as IPCC, IP dispatch and unified communications.
-Dual X86 Computing Platform: One Device, Also One Server
X86 is the most widely used instruction set architecture for servers and computers, and the vast majority of commercial software runs on it. The NC-MG1000-X adopts a dual X86 architecture: besides trunk, analog subscriber, wireless and intercom access and switching, the chassis also carries a complete X86 computing platform that can host an operating system and business software just like a server.
-One Device Covering All Interface Scenarios
There are 6 service board slots in total, and interface boards are combined as required. From traditional trunks and analog phones to wireless access, trunking intercom and audio amplification, one device completes multi-system convergence at the access layer, reducing the variety of site equipment and associated ancillaries.
Interface Type | Per-Board Capability | Max. per Device |
E1/T1 (main control board) | None / 1E1 / 2E1 / 4E1 selectable | Up to 4 E1/T1 |
FXO/FXS analog subscriber board | 16 POTS ports | 96 FXO/FXS |
Wireless module board | 8 GSM/CDMA/WCDMA, voice and SMS supported | 48 GSM/CDMA/WCDMA |
PTT line board | 4 ports; trunking and HF / VHF-UHF interfaces | 24 PTT |
Audio line board | 4 ports; mixing console, microphone and speaker interfaces | 24 audio |
E&M line board | 8 E&M trunk interfaces | 48 E&M |
Magneto line board | 8 magneto telephone interfaces | 48 magneto |
Signaling and Protocols: Compatible with Existing Networks
The value of an access device lies not only in connecting lines but also in making calls go through. The NC-MG1000-X covers five protocol categories — trunk signaling, VoIP, codecs, fax and network management — for easy interconnection with existing networks.
1. Signaling Protocols
Supports SS7 (No.7), PRI, No.1 R2, CAS, Q.SIG, V5.2 and DPNSS. Whether connecting to carrier trunks, private network exchanges, or existing PBX and softswitch offices, access can follow the existing signaling method.
2. VoIP and Codecs
VoIP supports SIP and IMS; voice codecs support G.711 U-Law and A-Law, G.711 Appendix 1, G.729 Annex A and Annex B, G.726-16 and G.726-32. A single main control board provides 128 G.711 channels, 64 G.729 / G.723 / G.726 channels and 32 T.38 fax channels; channel configuration can be arranged according to actual traffic.
3. Fax and Network
Fax supports T30, T38 and pass-through, covering both fax machine connection and IP bearer scenarios. Network protocols include IP, NAT, ICMP, ARP, HTTP, BOOTP, FTP, TFTP, DHCP, SNMP and Diff-Serv, for integration into existing IP networks and management systems.
4. Voice Processing
Built-in voice processing technologies include voice activity detection (VAD), comfort noise generation (CNG) and G.168 128ms echo cancellation, improving silence periods and echo problems during calls.
Function / Interface | Model | Qty | Details | Remarks |
Computing & Storage Platform | ||||
CPU | i7-8700 | 1 | Intel® Core™ i7 | |
Memory | HX424C15FB2/8-SP | 1 | DDR4 2400 16GB | Up to 32G |
Storage | SUV500MS/240G | 1 | 240GB SSD | Up to 1T |
Main Control & Power | ||||
Main control board | None / 1E1 / 2E1 / 4E1 selectable | 1 | 0-4E1; 128 G.711 channels; 64 G.729 / G.723 / G.726 channels; 32 T.38 fax channels | Mandatory |
Power board | DC -48V | 1 | AC or DC supply selectable | max. 2 |
Service Interface Boards (max. 6 per device) | ||||
Analog subscriber board | 16 FXO/FXS | 0 | POTS interfaces | 16 per board |
Wireless module board | 8 GSM/CDMA/WCDMA | 0 | Voice and SMS supported | 8 per board |
PTT line board | 4 PTT lines | 0 | Trunking and HF / VHF-UHF interfaces | 4 per board |
Audio line board | 4 audio lines | 0 | Mixing console, microphone and speaker interfaces | 4 per board |
E&M line board | 8 E&M interfaces | 0 | E&M trunk interfaces | 8 per board |
Magneto line board | 8 magneto interfaces | 0 | Magneto telephone interfaces | 8 per board |
The NC-MG1000-X is mainly applied in specific industries such as IPCC, IP dispatch and unified communications. The following sections describe where the device sits and what it does in each scenario; boxes in the diagrams represent access objects and connected platforms, and lines represent signaling and service flows.
-IPCC (IP Contact Center)
A contact center needs to connect carrier trunks as well as a large number of analog and IP agent positions, while guaranteeing voice quality. The NC-MG1000-X places trunk access, agent access and voice processing in one device, and sends traffic to the business platform via SIP / IMS.
-Emergency / Field Command
Field communication conditions are often uncertain: there may be no IP network, only wireless coverage, and power may not be stable. With dual power supply and wireless / magneto access capability, the NC-MG1000-X first converges communications on site, then backhauls them to the command center over a wired private network or IP trunk.
